TL;DR: POS Board Screen Power Jumper Config
AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving Glasgow, United Kingdom. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Glasgow and United Kingdom importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
AndroidSBC builds POS boards for the way retailers actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The WF-P family supports that pattern because the BOM is frozen per lot and the Glasgow partner can re-order the same configuration eighteen months later and receive the same board. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Glasgow partner can trace a single board back to its run.
WF-P3399 Technical Specifications
| Parameter | AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) | Industry Average |
|---|---|---|
| Processor | RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 28nm | Older 28nm or 40nm process |
| GPU | Mali-T860 MP4 | Older Mali-450 or basic GPU |
| NPU / AI | none | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI 2.0 plus eDP output at 4K@60Hz | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 11 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 5 plus Bluetooth 5.0 plus Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For United Kingdom importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for United Kingdom Buyers
The second problem is the peripheral stack. A POS board is useless if the cash drawer does not fire, if the barcode scanner needs a driver nobody has, or if the customer display shows the cashier screen instead of the promotion loop.
Staged OTA is shipped as a tool, not a promise. A Glasgow chain can push an update to a pilot group of lanes first, hold the rest, and roll back the image if the pilot shows a printer regression, all from the same console. AndroidSBC confirmed on September 23, 2026 that 31200 boards for Glasgow were on the water via Felixstowe - Shanghai, with the peripheral validation report from the Longgang bench included in the packing list.
Competitive Comparison: WF-P3399 vs Competing POS Android Boards
What follows is not a spec-sheet comparison. It is the four questions a Glasgow chain asks after its first failed rollout.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Fixed countertop terminals still account for the largest share of the market by product type, and hardware remains the largest share by component. That matters to a Glasgow buyer because it means the board is the part being replaced, while the enclosure, the panel and the counter harness are often re-used.
- Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P6180 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P5270 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The United Kingdom demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the WF-P price list, MOQ and lead time because a Glasgow partner is budgeting a multi-year refresh, not a single purchase order.
Partner Success Story: Albion Till Solutions (pub and restaurant POS integrator)
Aan Albion Till Solutions deployment in the United Kingdom hospitality segment illustrates how the WF-P POS board family supports Glasgow integrators. Albion Till Solutions deployed 31200 WF-P boards across 77 pub and restaurant sites.
- OEM relationship: AndroidSBC private-label SKU shipped with Albion Till Solutions branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus UKCA / Ofcom conformity, all bundled into the Shenzhen source-factory shipment.
Albion Till Solutions Hardware Programme Manager for United Kingdom Hospitality noted: Albion Till Solutions took the WF-P board because the contactless path handles the UK ceiling without a firmware fork, with 31200 units across the Glasgow estate.
Field Report: flagship store checkout and media wall installation
YANTIAN, September 23, 2026 - Man Qing, AndroidSBC field desk. On the United Kingdom configuration the WF-P3399 ran kiosk-mode lockdown with a single merchant app, and the watchdog recovered the lane after each simulated mains dip. The WF-P3399 POS Android motherboard order for Glasgow, United Kingdom cleared the burn-in station on schedule and is en route via the Felixstowe - Shanghai lane.
The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For United Kingdom integrators, the UKCA marking with the Ofcom radio interface registration paperwork is bundled.
Filed by Man Qing, AndroidSBC field desk, YANTIAN. UK hospitality operators ask for UKCA paperwork and check that the contactless reader handles the higher UK contactless ceiling without a firmware fork.
WF-P3399 Application Scenarios
The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Glasgow.
- Convenience and small format stores: the WF-P7600 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P7601 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7602 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Glasgow: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Glasgow Buyers
For Glasgow and United Kingdom buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and United Kingdom partners usually convert within one quarter.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?
Answer: It is. The WF-P family was specified around dual-screen high definition POS with 4K promotion wall, and every board in the family is validated on that use case before it leaves the Longgang factory.
Which silicon tiers are available in the WF-P family for United Kingdom buyers?
Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For United Kingdom buyers the choice is driven by counter throughput and by whether the lane needs an NPU.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.
What is the minimum order quantity and the sample lead time for United Kingdom?
Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Glasgow partner can call off against a frame agreement rather than ordering in one block.
Is custom ROM, boot logo or pre-installed app development available?
Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.
How are firmware updates delivered to a United Kingdom estate after deployment?
Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a United Kingdom estate of several hundred lanes can be updated in waves rather than all at once.
What shipping terms does AndroidSBC support for United Kingdom orders?
Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Glasgow partner receives tracking with the lot.
What happens if a board fails in the field in United Kingdom?
Answer: Each board carries a serial number logged against its burn-in record, so a field failure in United Kingdom is traced to its production lot, and the replacement ships from the same frozen BOM.
Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation
To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Glasgow integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Glasgow and United Kingdom the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
